Active 2-Way Nearfield Monitor HS 8i

• Equipped with: 8" woofer (75 Watt) + 1" tweeter (45 Watt)
• Power: 120-watt bi-amp
• Bass reflex system
• Frequency range: 38 - 30,000 Hz
• XLR input, balanced
• 6.3 mm jack input, balanced
• Input level adjustable
• Room control and high-trim control
• Fixing points on 4 sides
• Dimensions: 250 x 390 x 334 mm
• Weight: 10.7 kg
• Colour:

  Yamaha HS8 8″ Powered Studio Monitor 120W

  ลำโพงมอนิเตอร์ YAMAHA HS8 เป็นตู้ลำโพง 2 ทาง Bi-Amped Powered Studio Monitor, เป็นลำโพงแบบมีกำลังขยายในตัวขนาด 120 วัตต์ Total Output, ขนาดดอกลำโพง 8 นิ้ว, เสียงแหลม 1″ Dome Tweeter, ตอบสนองความถี่ 38 Hz to 30 kHz

  The HS8 Powered Studio Monitor from Yamaha is a bi-amplified monitor that is designed for accurate sound reproduction. It is capable of up to 120W of total output and features an 8-inch woofer and a 1-inch tweeter with waveguide that can produce frequencies up to 30kHz. The HS8 has both an XLR and 1/4″ TRS input that accept either balanced or unbalanced signals for integration into a variety of studio setups.

  

  Low Resonance Enclosure Design

  HS Series cabinets are designed to eliminate unwanted resonance and increase the accuracy of sound reproduction to their extreme limit. The enclosures are constructed from a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitered-joint technique. Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound

  Noise Reduction Technology

  Speaker port design can greatly influence the clarity of overall sound. Often a vortex at the either end of the port can generate air vibrations inside of the port, causing unwanted noise. By adopting a noise reduction technology that incorporates an analysis of a visual representation of the sound, Yamaha’s engineers are able to control and reduce the vortex. Through this analysis Yamaha has arrived at a port design that reduces noise up to 6dB

  Controls and Connectivity

  HS Series full-range models feature two response controls with settings that allow them to adapt to the surface acoustics of rooms of varying shape and size. ROOM CONTROL allows you to attenuate the unnatural, exaggerated low-end that can often occur when speakers are placed next to walls, while HIGH TRIM allows for more flexible control of high frequency response. For inputs, HS full-range speakers can accommodate a range of balanced and unbalanced sources such as mixers, keyboards and audio interfaces with XLR and TRS phone jacks

  Features

  • High-performance drivers and mounting system
  • 8″ cone woofer, 1″ dome tweeter
  • Impressive 38Hz to 30kHz frequency response
  • Large magnets in an Advanced Magnetic Circuit design
  • Built-in bi-amplification: 75-watt LF, 45-watt HF
  • Dedicated power amps are perfectly matched to the woofer and tweeter
  • Enclosure is designed to kill unwanted resonances that can influence sound
  • Room control and high-trim response controls give you optimum response in any room

  Specs

  System Type	2-Way Bi-Amped Powered Studio Monitor
  Frequency Response	38 Hz to 30 kHz
  Crossover Frequency	2 kHz
  Transducer	LF: 8″ (127 mm) Cone HF: 1″ (25 mm) Dome
  Output Power	Total: 120W LF: 75W HF: 45W
  Input Sensitivity	-10 dBu / 10 kΩ
  Inputs	1x Balanced XLR3-31 Type 1x 1/4″ (6.35 mm) Balanced TRS
  Controls	Level Control (+4 dB/Center Click) EQ: High Trim Switch (+/- 2 dB @ HF) Room Control Switch(0, -2, -4 dB under 500 Hz)
  Indicators	1x Power On White LED
  Power Consumption	60 W
  Enclosure	Type: Bass-Reflex Material: MDF
  Dimensions (WxHxD)	9.8 x 15.4 x 13.1″ (250 x 390 x 334 mm)
  Weight	22.5 lb (10.2 kg)